{"title":"Scuba Instruments \u0026 Navigation","description":"\u003cp\u003eCompasses from Suunto, Tecline, Mares and Cressi, including the Suunto SK-8 with its strap mount and replacement capsule, plus recycled line arrows and cookies for marking a guideline. Hold the compass level and in line with your body when you take a heading, or the bearing drifts as you swim. Log headings on a \u003ca href=\"\/collections\/scuba-slates-wetnotes\"\u003eslate or wetnotes\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"compass-pro-bungee","title":"Compass Pro Bungee","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eA compass card only reads correctly when it can swing level, and one tilted on a loose strap gives a wrong bearing with no warning that it is doing so. Holding the compass flat against the arm is the whole job of the mount, and a bungee does it better than a strap: nothing to buckle with the other hand, it works over a drysuit, and it takes up the slack as a wetsuit compresses at depth where a buckled strap loosens and has to be pulled tight again mid-dive. On a shore dive in poor visibility the difference is swimming back to the entry point rather than making a long surface swim, and a digital compass in a computer is no substitute once the diver is tilted. Wear it on the opposite forearm to a dive computer so neither obscures the other. Set the bezel on the surface before descending, and take a reciprocal before turning back. It suits a diver navigating on a shore dive.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWrist dive compass on a bungee mount\u003c\/li\u003e\n\u003cli\u003eHolds the card flat so it swings level\u003c\/li\u003e\n\u003cli\u003eNo buckle to adjust one-handed\u003c\/li\u003e\n\u003cli\u003eWorks over a drysuit\u003c\/li\u003e\n\u003cli\u003eTakes up slack as a wetsuit compresses\u003c\/li\u003e\n\u003cli\u003eWorn opposite the dive computer\u003c\/li\u003e\n\u003cli\u003eSet the bezel on the surface; take a reciprocal\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOne Compass Pro with bungee mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"H2O","offers":[{"title":"Default Title","offer_id":50626936308025,"sku":"9999976","price":1545.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/tecnomar-pro-tech-tmi-with-bungee.jpg?v=1747030060"},{"product_id":"bungee-mount-compass","title":"Bungee Mount Compass","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\n\u003cp\u003eA compass on a rigid strap is set at the surface and is loose by thirty metres, because neoprene compresses as depth increases and the arm underneath it gets thinner. An elasticated bungee mount takes that up, so the compass sits in the same place at the bottom as it did on the boat. On a navigation leg that means a heading sighted along the forearm rather than a compass that has rotated round the wrist. On a drysuit dive it holds over a thick undersuit and still tightens as the suit squeezes. On a shore dive it stays put through a surf entry. Wrist mounting also keeps it clear of a console, so the gauges stay clipped away while the heading is read. It suits a diver who navigates and does not want the compass buried in a console.\u003c\/p\u003e\n\u003ch4\u003eFeatures\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eType: wrist mounted compass\u003c\/li\u003e\n\u003cli\u003eStrap: elasticated bungee, holding position as a wetsuit or drysuit compresses at depth\u003c\/li\u003e\n\u003cli\u003eMounting: wrist, keeping the compass separate from a gauge console\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhat's Included\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eApeks bungee mount compass\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"APEKS","offers":[{"title":"Default Title","offer_id":50697809461561,"sku":"NS127111","price":2365.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/20White_1_2e8764d6-e18a-47ea-a248-37ccbcd95d4a.webp?v=1791641021"},{"product_id":"suunto-sk-8-capsule-sh","title":"SK-8 Capsule SH","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eThe mount on an SK-8 outlives the capsule fairly often, because bungee and webbing simply do not fail the way a fluid-filled compass does. A capsule that has taken a bubble, gone cloudy or lost its damping is finished, but the mount attached to it is not, and this part exists so that only the broken half gets replaced. It fits both the SK-8 bungee mount and the SK-8 strap mount, so it makes no difference which was bought originally. This is a repair part rather than a complete compass, so a first-time buyer needs the compass with a mount instead. Dive centres tend to hold one or two against the day a rental compass comes back with a bubble in it. It suits an SK-8 owner whose capsule has failed but whose mount is sound.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSK-8 compass capsule only, supplied without a mount\u003c\/li\u003e\n\u003cli\u003eFits both the SK-8 bungee mount and the SK-8 strap mount\u003c\/li\u003e\n\u003cli\u003eA repair part, not a complete compass\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOne SK-8 capsule\u003c\/li\u003e\u003c\/ul\u003e","brand":"SUUNTO","offers":[{"title":"Default Title","offer_id":50765726941497,"sku":"SS021121000","price":610.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/suunto-sk-8-4439-800x800pix.jpg?v=1747828717"},{"product_id":"diving-compass-with-bungee","title":"Diving Compass with Bungee","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eNavigation is the skill most divers name when asked what they want to improve, and the obstacle is usually an instrument that is awkward to reach rather than the technique itself. A bungee mount settles that end of the problem. The cord goes over a 5 mm glove in one movement, and it takes up slack as a wetsuit compresses at depth, where a buckled strap would work loose. The card is liquid damped, so it settles quickly enough for a bearing to be taken in the water instead of watched through a slow swing, and its luminescent numbering stays legible inside a wreck or on a late afternoon dive with no torch on it. It reads from the top face and through a side window, which allows a bearing to be taken with the arm held out rather than turned across the chest. It suits a shore entry, a wreck or a compass course.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLiquid-filled capsule that damps card swing\u003c\/li\u003e\n\u003cli\u003eLuminescent numbering, readable in low light\u003c\/li\u003e\n\u003cli\u003eReads from the top face and through a side window\u003c\/li\u003e\n\u003cli\u003eBungee wrist mount that goes over a 5 mm glove in one movement\u003c\/li\u003e\n\u003cli\u003e88.5 cm elastic cord that takes up slack as a wetsuit compresses\u003c\/li\u003e\n\u003cli\u003eBody measures 82 by 62 by 35 mm\u003c\/li\u003e\n\u003cli\u003eMounts on either wrist, so it pairs with a computer on the other\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLiquid-filled dive compass\u003c\/li\u003e\n\u003cli\u003e88.5 cm bungee cord\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SCUBA EVOLUTION","offers":[{"title":"Default Title","offer_id":51010998206777,"sku":null,"price":400.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/3422cedc-c198-442f-aff8-a18df076d470.webp?v=1753189603"},{"product_id":"compass","title":"Compass","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eNavigation is the skill that separates a dive from a swim, and it collapses the moment the compass card sticks or the housing fogs. This one is oil filled, which is what keeps the card turning smoothly and stops it seizing under pressure, inside a scratch-resistant polycarbonate case built to stay clear rather than craze after a season. The dial is highly luminous, so a heading is read at depth, in green water or under a kelp canopy without reaching for a torch. A side view window is the detail that matters most in use: a heading can be held while looking forward along the line of travel, rather than swimming with the wrist turned upward and the eyes off the route. It is compact enough to travel with. That answers a wreck run, a shore dive back to a fixed exit and a navigation exercise. It suits a diver who navigates rather than follows.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOil-filled polycarbonate case, scratch resistant\u003c\/li\u003e\n\u003cli\u003eHighly luminous dial for low light\u003c\/li\u003e\n\u003cli\u003eSide view window for navigating on a forward heading\u003c\/li\u003e\n\u003cli\u003eCompact enough for travel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eCressi compass\u003c\/li\u003e\u003c\/ul\u003e","brand":"CRESSI","offers":[{"title":"Black","offer_id":51134661951801,"sku":"KB760100","price":2160.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/bgooiqj0bolyswapgj7u_43cbdeab-831b-4563-9279-de4c8261c695.jpg?v=1788381821"},{"product_id":"sk-8-dive-compass-sh","title":"SK-8 Dive Compass SH","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eEvery electronic instrument on a dive shares one failure mode, which is the battery, and a digital compass is no exception. The SK-8 is analogue, so it works on a dive where a computer has flooded, on a rental set with no electronics at all, and on a technical dive where a mechanical backup is part of the plan rather than an afterthought. It comes with a choice of mount, bungee or strap, and both take the same capsule, so the mount can be changed later without buying another compass. The bungee version holds it flat against the forearm over any thickness of exposure suit, which is what keeps the card level enough to read. Suunto make it in bungee and strap mount versions, and the bare capsule is stocked separately as a replacement. It suits a diver who wants navigation that does not depend on a charge.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAnalogue dive compass, independent of any battery or computer\u003c\/li\u003e\n\u003cli\u003eTwo mounts: bungee mount or strap mount, both taking the same capsule\u003c\/li\u003e\n\u003cli\u003eBungee holds the compass flat to the forearm over any exposure suit\u003c\/li\u003e\n\u003cli\u003eBungee or strap mount\u003c\/li\u003e\n\u003cli\u003eThe bare capsule is stocked separately as a replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eSK-8 dive compass with the mount selected\u003c\/li\u003e\u003c\/ul\u003e","brand":"SUUNTO","offers":[{"title":"Bungee Mount","offer_id":51172003545401,"sku":"SS051090000","price":1299.0,"currency_code":"ZAR","in_stock":true},{"title":"Strap Mount","offer_id":54442561536313,"sku":"SS051089000","price":1250.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/ss021118000_sk-8_compass_bungee_mount_nh.webp?v=1758193590"},{"product_id":"fe-recycled-line-arrow","title":"Recycled Line Arrow","description":"\u003cp\u003eA directional line arrow moulded from recycled hospital PPE plastic. Slides onto a guideline and points the way out - the single most important piece of information in an overhead environment. Grips the line firmly enough to stay put in flow, loose enough to reposition with a gloved hand.\u003c\/p\u003e\u003cp\u003eSold singly.\u003c\/p\u003e","brand":"FOURTH ELEMENT","offers":[{"title":"Default Title","offer_id":54440483782969,"sku":"RLA001","price":58.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/1-11.jpg?v=1789420722"},{"product_id":"fe-recycled-cookie","title":"Recycled Cookie","description":"\u003cp\u003eA non-directional line marker moulded from recycled hospital PPE plastic. Cookies mark your personal jump or reference point on a guideline without implying a direction, so they work alongside arrows rather than competing with them. Notch them or mark them to make them yours.\u003c\/p\u003e\u003cp\u003eSold singly.\u003c\/p\u003e","brand":"FOURTH ELEMENT","offers":[{"title":"Default Title","offer_id":54440483815737,"sku":"RC001","price":58.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/1-12.jpg?v=1789420722"},{"product_id":"fe-recycled-line-arrow-5-pack","title":"Recycled Line Arrow - Pack of 5","description":"\u003cp\u003eFive directional line arrows moulded from recycled hospital PPE plastic. Slide onto a guideline to point the way out. Five is the sensible working number for a cave or wreck reel kit - enough to mark the jumps on a dive without carrying a jar.\u003c\/p\u003e","brand":"FOURTH ELEMENT","offers":[{"title":"Default Title","offer_id":54440483848505,"sku":"RLA002","price":231.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/1-13.jpg?v=1789420722"},{"product_id":"fe-recycled-cookie-5-pack","title":"Recycled Cookie - Pack of 5","description":"\u003cp\u003eFive non-directional line markers moulded from recycled hospital PPE plastic. Cookies mark your own reference points on a guideline without implying a direction. Five covers a normal dive's worth of jumps and personal markers.\u003c\/p\u003e","brand":"FOURTH ELEMENT","offers":[{"title":"Default Title","offer_id":54440483881273,"sku":"RC002","price":231.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/1-14.jpg?v=1789420722"},{"product_id":"fe-recycled-line-arrow-bag-100","title":"Recycled Line Arrow - Bag of 100","description":"\u003cp\u003eA refill bag of 100 directional line arrows moulded from recycled hospital PPE plastic. Bulk quantity for dive centres, cave projects and training providers who go through markers rather than keeping the same five for years.\u003c\/p\u003e","brand":"FOURTH ELEMENT","offers":[{"title":"Default Title","offer_id":54440483914041,"sku":"RLA004","price":4026.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/1-15.jpg?v=1789420723"},{"product_id":"fe-recycled-cookie-bag-100","title":"Recycled Cookie - Bag of 100","description":"\u003cp\u003eA refill bag of 100 non-directional line markers moulded from recycled hospital PPE plastic. Bulk quantity for dive centres, cave projects and training providers.\u003c\/p\u003e","brand":"FOURTH ELEMENT","offers":[{"title":"Default Title","offer_id":54440483979577,"sku":"RC004","price":4227.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/1-16.jpg?v=1789420722"},{"product_id":"peregrine-console-compass","title":"Peregrine Console Compass","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eA compass card is balanced for the magnetic dip of the hemisphere it is sold into, and a northern card used in South African water tilts and sticks against the capsule instead of settling, which is why the wrong one reads badly no matter how carefully it is held. Shearwater build both. On a local dive off Cape Town or Sodwana the southern card settles flat and gives a bearing the diver can trust. On a trip to the Red Sea or the Mediterranean the northern card does the same there. On a low visibility dive where navigation is the whole plan, a card that hangs up is worse than no compass at all. The module fits the Peregrine and Peregrine TX consoles. It suits a diver building or repairing a console who dives mostly in one hemisphere, and southern is the correct choice for South African diving.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eType: console compass module\u003c\/li\u003e\n\u003cli\u003eBalance: northern or southern hemisphere card\u003c\/li\u003e\n\u003cli\u003eCompatible: Shearwater Peregrine Console and Peregrine TX Console\u003c\/li\u003e\n\u003cli\u003eNote: card balance is hemisphere specific and affects how freely the compass settles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOne compass module in the hemisphere balance selected\u003c\/li\u003e\u003c\/ul\u003e","brand":"SHEARWATER","offers":[{"title":"Southern","offer_id":54448903029049,"sku":"16038","price":995.0,"currency_code":"ZAR","in_stock":true},{"title":"Northern","offer_id":54448903061817,"sku":"16037","price":995.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/COMPASSCONSOLE.jpg?v=1788874214"},{"product_id":"termo-industria-standard-compass","title":"Standard Compass","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eA compass that is slow to settle costs a diver the heading exactly when visibility drops and it is needed most. Termo Industria build this one around two magnets, so the card swings to north quickly, and fill the capsule with oil to damp it once it arrives. The 60 mm dial reads from the top when held flat and through a side window when the arm is raised to sight a bearing, and the card is luminous for night dives and silty water. Its bezel numbers are moulded right through the ring, so they cannot be rubbed away by years of kit bags. Two mounts are offered: an elastic bungee that tightens itself as a wetsuit compresses at depth, and a buckle wrist strap for a fixed fit over a thin suit. Navigation training dives, a shore entry with a reciprocal heading back to the exit, and a reef search in green water all rely on it. It suits a diver learning or practising underwater navigation.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOil filled capsule, 60 mm diameter\u003c\/li\u003e\n\u003cli\u003eTwo magnets for a fast response\u003c\/li\u003e\n\u003cli\u003eTop and side reading window\u003c\/li\u003e\n\u003cli\u003eLuminous card with 10 degree graduations\u003c\/li\u003e\n\u003cli\u003eBezel numbers moulded through the ring\u003c\/li\u003e\n\u003cli\u003eBungee mount: 72 g; follows suit compression at depth\u003c\/li\u003e\n\u003cli\u003eWrist strap mount: 92 g; buckle strap\u003c\/li\u003e\n\u003cli\u003eBalanced for the southern hemisphere\u003c\/li\u003e\n\u003cli\u003eMade in Italy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOne Termo Industria standard compass on the selected mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"TERMO INDUSTRIA","offers":[{"title":"Bungee","offer_id":54542057537849,"sku":"130008\/B","price":1395.0,"currency_code":"ZAR","in_stock":true},{"title":"Wrist strap","offer_id":54542057570617,"sku":"130008","price":1395.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/termo-industria-standard-compass-1.jpg?v=1791100561"},{"product_id":"termo-industria-standard-compass-capsule","title":"Standard Compass Replacement Capsule","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eA cracked lens or an air bubble in the oil ends a compass's working life, but it does not end the life of the strap, bungee or console boot around it. This is the Termo Industria standard compass capsule on its own, the same 60 mm oil-filled unit fitted to their bungee, wrist and console compasses. Two magnets give it a fast response, the card is luminous and graduated every 10 degrees, and it reads from the top or through the side window. Swapping the capsule restores a console that took a knock on a boat ladder, gives a dive centre a spare for the rental navigation compasses, and lets a diver move a compass from a wrist strap into a console without buying a second complete unit. Check that the mount or console was built for the Termo Industria standard compass before ordering. It suits a diver or centre repairing or converting a Termo Industria compass.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOil filled compass capsule, 60 mm\u003c\/li\u003e\n\u003cli\u003eTwo magnets for a fast response\u003c\/li\u003e\n\u003cli\u003eTop and side reading window\u003c\/li\u003e\n\u003cli\u003eLuminous card, 10 degree graduations\u003c\/li\u003e\n\u003cli\u003eBezel numbers moulded through the ring\u003c\/li\u003e\n\u003cli\u003eWeight: 40 g\u003c\/li\u003e\n\u003cli\u003eBalanced for the southern hemisphere\u003c\/li\u003e\n\u003cli\u003eMade in Italy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOne Termo Industria standard compass capsule\u003c\/li\u003e\u003c\/ul\u003e","brand":"TERMO INDUSTRIA","offers":[{"title":"Default Title","offer_id":54542057603385,"sku":"130009","price":1189.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/termo-industria-standard-compass-capsule-1.jpg?v=1791100561"},{"product_id":"termo-industria-pro-compass-bungee-grey","title":"Pro Compass Bungee Grey Ring","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eThe Pro is Termo Industria's step up for a diver who navigates on every dive rather than on the odd training exercise. Its 56 mm capsule sits in a bungee mount with a grey bezel ring, and the elastic cord tightens as a wetsuit or drysuit undergarment compresses with depth, so the compass stays square on the wrist instead of rotating. The card glows for night work and poor visibility, and a side window lets the diver keep a bearing with the arm extended. Typical dives include a wreck approach from a shotline on a set heading, a drift where the group has to surface near the boat, and a navigation speciality where timed legs and reciprocals are repeated until they are second nature. It suits a diver who navigates regularly and wants a mount that stays put.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePro Compass capsule, 56 mm diameter\u003c\/li\u003e\n\u003cli\u003eGrey bezel ring\u003c\/li\u003e\n\u003cli\u003eBungee cord wrist mount; follows suit compression\u003c\/li\u003e\n\u003cli\u003eLuminous card for night and low visibility\u003c\/li\u003e\n\u003cli\u003eSide reading window\u003c\/li\u003e\n\u003cli\u003eWeight: 103 g\u003c\/li\u003e\n\u003cli\u003eBalanced for the southern hemisphere\u003c\/li\u003e\n\u003cli\u003eMade in Italy\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOne Termo Industria Pro Compass on bungee mount, grey ring\u003c\/li\u003e\u003c\/ul\u003e","brand":"TERMO INDUSTRIA","offers":[{"title":"Default Title","offer_id":54542057636153,"sku":"130003\/GRAY","price":1550.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/termo-industria-pro-compass-bungee-grey-1.jpg?v=1791100561"},{"product_id":"tecline-wrist-compass","title":"Wrist Compass","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eFollowing a heading back to an anchor line in green water is a skill that still depends on an analogue compass, whatever a computer can do. This Tecline wrist compass has a low-profile plastic housing on an adjustable strap, so it sits close to the forearm over a thin suit or a thick drysuit sleeve. The rotating bezel sets a bearing before descent, and a side window lets the diver read the heading while swimming with the arm held level in front. On a navigation course at an inland lake, that side window makes reciprocal courses easier to follow. On a reef dive with a sandy return route, a bearing taken at the boat can save a long surface swim at the end. The dial is fluorescent for low light, and the compass gives direction only, with no depth or time. It suits a student or recreational diver who wants a simple wrist compass.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDesign: low-profile dive compass\u003c\/li\u003e\n\u003cli\u003eBezel: rotating, for setting a bearing\u003c\/li\u003e\n\u003cli\u003eReading: side window for direct reading of the heading\u003c\/li\u003e\n\u003cli\u003eDial: fluorescent\u003c\/li\u003e\n\u003cli\u003eHousing: plastic\u003c\/li\u003e\n\u003cli\u003eMount: adjustable wrist strap\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eTecline compass with wrist strap\u003c\/li\u003e\u003c\/ul\u003e","brand":"TECLINE","offers":[{"title":"Default Title","offer_id":67575278076217,"sku":"T10150-1","price":987.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/kompas-s-tech.jpg?v=1790774890"},{"product_id":"tecline-compass-with-bungee-mount","title":"Compass with Bungee Mount","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eA wrist strap that fits over a thin wetsuit slides around on a drysuit sleeve, and one that fits a drysuit flaps loose on bare skin. An elastic bungee mount solves both: it grips the arm whatever the suit and compresses with it at depth. Tecline fit their low-profile compass to an elastomeric bungee mount, so it sits flat on the forearm and catches little on lines or wreckage. It has a rotating bezel for setting a bearing, a side window for reading the heading with the arm held level, and a fluorescent dial that stays readable in low light. That suits a navigation course on a murky inland site, a wreck diver taking a bearing along a hull, and a cave or cavern diver who wants a backup heading on a low-profile mount. It suits a diver who wants a flat, bungee-mounted compass that fits over any exposure suit.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eType: low-profile dive compass\u003c\/li\u003e\n\u003cli\u003eMount: elastomeric bungee\u003c\/li\u003e\n\u003cli\u003eBezel: rotating, for setting a bearing\u003c\/li\u003e\n\u003cli\u003eSide window: direct reading\u003c\/li\u003e\n\u003cli\u003eDial: fluorescent\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eTecline compass on elastomeric bungee mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"TECLINE","offers":[{"title":"Default Title","offer_id":67575354294585,"sku":"T10150","price":1539.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/kompas-tecline-w-obudowie-z-gumkami.jpg?v=1790776334"},{"product_id":"tecline-x7-compass","title":"X7 Compass","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eNavigating by compass underwater means reading a heading quickly, often while swimming, and a small shallow capsule can be hard to read at a glance. The X7 is Tecline's high-profile compass, with a taller capsule that gives a clearer view of the card. It has a rotating bezel for setting a bearing, a side window for reading the heading with the arm held level, and a fluorescent dial for low light. Tecline offer it two ways. The bungee version sits on an elastomeric mount that grips over a drysuit or a thick wetsuit and compresses with the suit at depth. The strap version uses an adjustable wrist mount, a familiar fit for a diver in a thin suit on warm-water trips. That covers a navigation specialty course, a search pattern on a recovery dive, and a return to the shot line on a wreck in poor visibility. It suits a diver who navigates often and wants a compass that is quick to read.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eType: high-profile dive compass\u003c\/li\u003e\n\u003cli\u003eMounts: elastomeric bungee, or adjustable wrist strap\u003c\/li\u003e\n\u003cli\u003eBezel: rotating, for setting a bearing\u003c\/li\u003e\n\u003cli\u003eSide window: direct reading\u003c\/li\u003e\n\u003cli\u003eDial: fluorescent\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eX7 compass on the selected mount\u003c\/li\u003e\u003c\/ul\u003e","brand":"TECLINE","offers":[{"title":"Bungee","offer_id":67575354327353,"sku":"T10160","price":2232.0,"currency_code":"ZAR","in_stock":true},{"title":"Wrist strap","offer_id":67575354360121,"sku":"T10170","price":2232.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/kompas-tecline-x7-w-obudowie-z-gumkami.jpg?v=1790776335"},{"product_id":"divesoft-echo-solid-state-set","title":"ECHO Solid State Gas Analyser Set with Flow Limiter","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eA blended cylinder is only as safe as the analysis behind its label, and the Divesoft ECHO Solid State Set checks oxygen, helium and carbon monoxide from one compact unit. The oxygen reading comes from a DVO2 solid-state sensor, which Divesoft rates for a longer service life and less maintenance than a galvanic cell. On a trimix weekend the helium channel reads 0 to 100% at 0.1% resolution using the speed of sound, so there is no helium cell to wear out. At a busy fill station the Professional Flow Limiter Mk2 in the case holds a constant 0.2 litres per minute whatever the cylinder pressure, which keeps a near-empty stage readable before a top-up. The carbon monoxide channel alarms at 5 ppm, a sensible check on a remote trip where the compressor is unfamiliar. Results pass over Bluetooth to the Divesoft app for logging and cylinder labels, and the battery runs up to 50 hours between USB-C charges. It suits technical divers, instructors and blenders who analyse every cylinder and want fewer sensors to replace.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eGases: oxygen, helium and carbon monoxide\u003c\/li\u003e\n\u003cli\u003eOxygen sensor: DVO2 solid-state sensor\u003c\/li\u003e\n\u003cli\u003eOxygen range: 0 to 100%, 0.1% resolution, about 5 s to 90% of the reading\u003c\/li\u003e\n\u003cli\u003eHelium range: 0 to 100%, 0.1% resolution, speed-of-sound measurement\u003c\/li\u003e\n\u003cli\u003eCarbon monoxide range: 0 to 100 ppm, alarm at 5 ppm\u003c\/li\u003e\n\u003cli\u003eFlow limiter: Professional Flow Limiter Mk2, DIN G5\/8, constant 0.2 L\/min, 300 bar maximum working pressure\u003c\/li\u003e\n\u003cli\u003eDisplay: high-reflective TFT for bright conditions\u003c\/li\u003e\n\u003cli\u003eBattery: rechargeable Li-ion, 3.7 Wh, up to 50 h of use\u003c\/li\u003e\n\u003cli\u003eCharging: USB-C, 5 V \/ 1 A, about 2.5 h\u003c\/li\u003e\n\u003cli\u003eConnectivity: Bluetooth Low Energy with the Divesoft app\u003c\/li\u003e\n\u003cli\u003eHousing: PC-ABS with an integrated wrist strap\u003c\/li\u003e\n\u003cli\u003eSize: 127 mm diameter, 37.5 mm thick, 410 mm long including the strap\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0 to 40 degrees C\u003c\/li\u003e\n\u003cli\u003eWarranty: 24 months on the analyser and the solid-state sensor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eECHO Solid State analyser\u003c\/li\u003e\n\u003cli\u003eDVO2 solid-state oxygen sensor with connector cable\u003c\/li\u003e\n\u003cli\u003eProfessional Flow Limiter Mk2 DIN G5\/8\u003c\/li\u003e\n\u003cli\u003eConnection hose\u003c\/li\u003e\n\u003cli\u003eUSB-C charging cable\u003c\/li\u003e\n\u003cli\u003eEVA carry case\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DIVESOFT","offers":[{"title":"Default Title","offer_id":67634206867769,"sku":"8530","price":29800.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/divesoft-echo-solid-state-set-case.jpg?v=1791626235"},{"product_id":"divesoft-echo-set","title":"ECHO Gas Analyser Set with Flow Limiter","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eChecking a trimix fill means knowing three numbers, and the Divesoft ECHO Set reads oxygen, helium and carbon monoxide from one analyser, with a professional flow limiter already packed in the case. Before a deep reef dive on nitrox the oxygen channel reads 0 to 100% at 0.1% resolution through a Divesoft R22S galvanic sensor, settling in about five seconds. For trimix the helium figure comes from a speed-of-sound measurement rather than a sensor that ages, so that side never needs a replacement cell. On a liveaboard with an unfamiliar compressor the carbon monoxide channel alarms at 5 ppm, flagging contamination before anyone breathes it. The Professional Flow Limiter Mk2 fits a DIN G5\/8 valve and holds 0.2 litres per minute at any cylinder pressure, which helps when checking the dregs of a stage before blending. The battery lasts up to 100 hours and recharges over USB-C, and readings pass to the Divesoft app over Bluetooth for logging and labels. It suits technical divers and dive centres that analyse every cylinder they hand out.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eGases: oxygen, helium and carbon monoxide\u003c\/li\u003e\n\u003cli\u003eOxygen sensor: Divesoft R22S galvanic sensor\u003c\/li\u003e\n\u003cli\u003eOxygen range: 0 to 100%, 0.1% resolution, about 5 s to 90% of the reading\u003c\/li\u003e\n\u003cli\u003eHelium range: 0 to 100%, 0.1% resolution, speed-of-sound measurement\u003c\/li\u003e\n\u003cli\u003eCarbon monoxide range: 0 to 100 ppm, alarm at 5 ppm\u003c\/li\u003e\n\u003cli\u003eFlow limiter: Professional Flow Limiter Mk2, DIN G5\/8, constant 0.2 L\/min, 300 bar maximum working pressure\u003c\/li\u003e\n\u003cli\u003eDisplay: high-reflective TFT for bright conditions\u003c\/li\u003e\n\u003cli\u003eBattery: rechargeable Li-ion, 3.7 Wh, up to 100 h of use\u003c\/li\u003e\n\u003cli\u003eCharging: USB-C, 5 V \/ 1 A, about 2.5 h\u003c\/li\u003e\n\u003cli\u003eConnectivity: Bluetooth Low Energy with the Divesoft app\u003c\/li\u003e\n\u003cli\u003eHousing: PC-ABS with an integrated wrist strap\u003c\/li\u003e\n\u003cli\u003eSize: 127 mm diameter, 37.5 mm thick, 410 mm long including the strap\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0 to 40 degrees C\u003c\/li\u003e\n\u003cli\u003eWarranty: 24 months on the analyser, 12 months on the battery and oxygen sensor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eECHO analyser\u003c\/li\u003e\n\u003cli\u003eDivesoft R22S oxygen sensor\u003c\/li\u003e\n\u003cli\u003eProfessional Flow Limiter Mk2 DIN G5\/8\u003c\/li\u003e\n\u003cli\u003eConnection hose\u003c\/li\u003e\n\u003cli\u003eUSB-C charging cable\u003c\/li\u003e\n\u003cli\u003eEVA carry case\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DIVESOFT","offers":[{"title":"Default Title","offer_id":67634206933305,"sku":"8529","price":21900.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/divesoft-echo-set-case.jpg?v=1791626237"},{"product_id":"divesoft-echo-analyser","title":"ECHO Gas Analyser","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eOne round, palm-sized unit answers the question of what is in the cylinder: the Divesoft ECHO reads oxygen, helium and carbon monoxide and shows the results on its own high-reflective display. On a nitrox boat dive the R22S galvanic sensor gives the oxygen figure to 0.1% in about five seconds, and the integrated strap loops over a wrist while the other hand works the valve. For trimix the helium reading uses the speed of sound through the sample, so there is no helium cell to buy later. At a club or shop fill station the carbon monoxide channel alarms at 5 ppm, an early warning that a fill needs looking into. The analyser ships without a flow limiter; it pairs with the Divesoft Professional Flow Limiter Mk2 and connection hose, sold separately, or the ECHO Set bundles both. Charging is over USB-C, the battery runs up to 100 hours, and readings can go to the Divesoft app over Bluetooth. It suits divers who already own a flow limiter and want oxygen, helium and CO in one compact tool.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eGases: oxygen, helium and carbon monoxide\u003c\/li\u003e\n\u003cli\u003eOxygen sensor: Divesoft R22S galvanic sensor\u003c\/li\u003e\n\u003cli\u003eOxygen range: 0 to 100%, 0.1% resolution, about 5 s to 90% of the reading\u003c\/li\u003e\n\u003cli\u003eHelium range: 0 to 100%, 0.1% resolution, speed-of-sound measurement\u003c\/li\u003e\n\u003cli\u003eCarbon monoxide range: 0 to 100 ppm, alarm at 5 ppm\u003c\/li\u003e\n\u003cli\u003eDisplay: high-reflective TFT for bright conditions\u003c\/li\u003e\n\u003cli\u003eBattery: rechargeable Li-ion, 3.7 Wh, up to 100 h of use\u003c\/li\u003e\n\u003cli\u003eCharging: USB-C, 5 V \/ 1 A, about 2.5 h\u003c\/li\u003e\n\u003cli\u003eConnectivity: Bluetooth Low Energy with the Divesoft app\u003c\/li\u003e\n\u003cli\u003eHousing: PC-ABS with an integrated wrist strap\u003c\/li\u003e\n\u003cli\u003eSize: 127 mm diameter, 37.5 mm thick, 410 mm long including the strap\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0 to 40 degrees C\u003c\/li\u003e\n\u003cli\u003eFlow limiter: not included\u003c\/li\u003e\n\u003cli\u003eWarranty: 24 months on the analyser, 12 months on the battery and oxygen sensor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eECHO analyser\u003c\/li\u003e\n\u003cli\u003eDivesoft R22S oxygen sensor\u003c\/li\u003e\n\u003cli\u003eUSB-C charging cable\u003c\/li\u003e\n\u003cli\u003eEVA carry case\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DIVESOFT","offers":[{"title":"Default Title","offer_id":67634207031609,"sku":"8500E","price":19300.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/divesoft-echo-analyser-front.jpg?v=1791626237"},{"product_id":"divesoft-solo-o2-analyser","title":"SOLO O2 Oxygen Analyser","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eAnalysing a nitrox fill should take seconds, and the Divesoft SOLO O2 is built to make that check a habit for recreational divers. One press switches it on, and the OLED screen shows the oxygen percentage alongside the maximum operating depth for ppO2 settings of 1.2, 1.4 and 1.6 bar, so the cylinder label can be written on the spot. At a dive centre the built-in gas mixing calculator helps plan the next fill, while an onboard thermometer warns when temperature may affect the sensor and a pressure sensor allows for altitude. On a dive holiday the rechargeable battery manages around 210 measurements or seven hours of continuous use, topped up from the supplied USB-C cable. The R22S oxygen sensor is designed for easy user replacement and has a life expectancy of about two years. When trimix comes into the picture, Divesoft can upgrade the unit to the full SOLO analyser by adding a helium sensor. It suits nitrox divers and instructors who want their own analyser with a route to trimix later.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eGas measured: oxygen, 0 to 100%\u003c\/li\u003e\n\u003cli\u003eAccuracy: plus or minus 1% (maker figure)\u003c\/li\u003e\n\u003cli\u003eDisplay: OLED showing oxygen, MOD, date and temperature\u003c\/li\u003e\n\u003cli\u003eMOD readouts: ppO2 1.2, 1.4 and 1.6 bar\u003c\/li\u003e\n\u003cli\u003eSensor: Divesoft R22S with Molex connector, user replaceable, about 2 years life expectancy\u003c\/li\u003e\n\u003cli\u003eSample connection: DIN valve G5\/8 (EN 144-2), 200 and 300 bar\u003c\/li\u003e\n\u003cli\u003eGas flow: 0.2 L\/min nominal\u003c\/li\u003e\n\u003cli\u003eOperating pressure: 700 to 1100 mbar (sea level to 3000 m altitude)\u003c\/li\u003e\n\u003cli\u003eMeasuring temperature: 0 to 40 degrees C\u003c\/li\u003e\n\u003cli\u003eBattery: rechargeable Li-ion, about 210 measurements or 7 h continuous use\u003c\/li\u003e\n\u003cli\u003eCharging: USB-C, 3 to 4 h\u003c\/li\u003e\n\u003cli\u003eBody: ABS-PC\u003c\/li\u003e\n\u003cli\u003eSize: 85 x 205 x 40 mm\u003c\/li\u003e\n\u003cli\u003eUpgrade: to the SOLO trimix analyser, carried out by Divesoft\u003c\/li\u003e\n\u003cli\u003eWarranty: 24 months, 12 months on the battery and oxygen sensor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSOLO O2 analyser\u003c\/li\u003e\n\u003cli\u003eDivesoft R22S oxygen sensor\u003c\/li\u003e\n\u003cli\u003eBasic flow limiter\u003c\/li\u003e\n\u003cli\u003eUSB-C cable\u003c\/li\u003e\n\u003cli\u003eSemi-hard zipper case\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DIVESOFT","offers":[{"title":"Default Title","offer_id":67634207195449,"sku":"8302","price":11200.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/divesoft-solo-o2-analyser-front.jpg?v=1791626238"},{"product_id":"divesoft-he-o2-analyser","title":"He\/O2 Analyser","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eBlending trimix leaves no room for guesswork, and the Divesoft He\/O2 Analyser measures both oxygen and helium from 0 to 100% so every mix can be checked before it is labelled. Helium is read by the speed of sound over an 800 mm measuring base, which means there is no helium sensor to wear out or replace. At a fill station the analyser can be connected to a compressor to watch oxygen content during continuous filling, with warning alarms and the option of a relay that switches the compressor off past a set limit. On a dive trip the built-in mixing calculator helps plan top-ups, and a FOUL AIR warning appears when a hypoxic mix holds no inert gas other than nitrogen. With optional measuring modules it also checks voltage and resistance, a quick way to test dive lights and scooters. It can identify argon too, and in a special setting it measures argon purity. It suits technical divers, blenders and dive centres that mix nitrox and trimix and want one analyser for both gases.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eGases: oxygen and helium\u003c\/li\u003e\n\u003cli\u003eOxygen range: 0 to 100%\u003c\/li\u003e\n\u003cli\u003eHelium range: 0 to 100%, speed-of-sound measurement with no helium sensor\u003c\/li\u003e\n\u003cli\u003eOxygen sensor: Divesoft R22S with Molex connector\u003c\/li\u003e\n\u003cli\u003eSample connection: DIN valve G5\/8 (EN 144-2), 200 and 300 bar\u003c\/li\u003e\n\u003cli\u003eGas flow: 0.2 L\/min rated\u003c\/li\u003e\n\u003cli\u003eOperating pressure: 700 to 1100 mbar (sea level to 3000 m altitude)\u003c\/li\u003e\n\u003cli\u003eMeasuring temperature: 0 to 40 degrees C\u003c\/li\u003e\n\u003cli\u003eExtra functions: mixing calculator, compressor monitoring with alarms and relay output, argon identification\u003c\/li\u003e\n\u003cli\u003eElectrical testing: voltage and resistance with optional measuring modules\u003c\/li\u003e\n\u003cli\u003eDisplay: OLED\u003c\/li\u003e\n\u003cli\u003eBody: hard-anodised aluminium alloy\u003c\/li\u003e\n\u003cli\u003ePower: rechargeable Li-ion battery, charged over a USB 2.0 AB cable\u003c\/li\u003e\n\u003cli\u003eSize: 82 x 200 x 37 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 720 g\u003c\/li\u003e\n\u003cli\u003eWarranty: 24 months, 12 months on the battery and oxygen sensor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHe\/O2 analyser with Divesoft R22S oxygen sensor fitted\u003c\/li\u003e\n\u003cli\u003eSimple flow limiter\u003c\/li\u003e\n\u003cli\u003eSemi-hard zipper case, 250 x 205 mm\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 AB cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DIVESOFT","offers":[{"title":"Default Title","offer_id":67634223219001,"sku":"8313","price":22800.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/divesoft-he-o2-analyser-front.jpg?v=1791626405"},{"product_id":"divesoft-dna-analyser","title":"DNA Nitrox Analyser with O2 Sensor","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eA nitrox check is easier to keep up when the analyser lives in a pocket, and the Divesoft DNA is a 100 g capsule that measures oxygen and sends the reading to the Divesoft app over Bluetooth. There is no screen on the unit; the phone becomes the display, the app works offline, and it calculates maximum operating depth for up to three ppO2 settings before generating a cylinder label. On a boat dive the DNA connects directly to a DIN G5\/8 or M26x2 valve outlet, so a quick check needs no hose. When travelling, the anodised aluminium body with TPU end caps rides in a small semi-hard case, and the CR2450 coin cell lasts one to two years before a user swap. This pack includes the R22S oxygen sensor, and the DNA also accepts R22D sensors. For fill stations it works with the Divesoft Professional Flow Limiter or the QD flow limiter and connection hose, sold separately. It suits recreational nitrox divers and travellers who want a pocket-sized analyser of their own.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eGas measured: oxygen, 0 to 100%\u003c\/li\u003e\n\u003cli\u003eDisplay: smartphone running the Divesoft app, connected by Bluetooth\u003c\/li\u003e\n\u003cli\u003eApp functions: MOD for up to three ppO2 settings, cylinder labels, works offline\u003c\/li\u003e\n\u003cli\u003eOxygen sensor: Divesoft R22S included, R22D also compatible\u003c\/li\u003e\n\u003cli\u003eGas connection: direct to DIN G5\/8 (200 and 300 bar) and M26x2 valves, or through Divesoft flow limiters\u003c\/li\u003e\n\u003cli\u003eGas flow: 0.2 L\/min rated\u003c\/li\u003e\n\u003cli\u003eOperating pressure: 700 to 1100 mbar (sea level to 3000 m altitude)\u003c\/li\u003e\n\u003cli\u003eMeasuring temperature: 0 to 40 degrees C\u003c\/li\u003e\n\u003cli\u003eBattery: CR2450 coin cell, user replaceable, 1 to 2 years typical life\u003c\/li\u003e\n\u003cli\u003eBody: anodised aluminium with protective TPU ends\u003c\/li\u003e\n\u003cli\u003eSize: 45.6 x 111 x 40 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 100 g, 126 g with the sensor\u003c\/li\u003e\n\u003cli\u003eWarranty: 24 months on the analyser, 12 months on the sensor, battery excluded\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDNA analyser\u003c\/li\u003e\n\u003cli\u003eDivesoft R22S oxygen sensor\u003c\/li\u003e\n\u003cli\u003eSemi-hard zipper case, 75 x 150 mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DIVESOFT","offers":[{"title":"Default Title","offer_id":67634223284537,"sku":"8504","price":6200.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/divesoft-dna-analyser-with-sensor.jpg?v=1791626406"},{"product_id":"divesoft-analyser-set-blender","title":"He\/O2 Analyser Blender Set","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eA fill station that blends nitrox and trimix every day needs its analyser protected and ready, and the Divesoft Analyser Set Blender packs the He\/O2 analyser into a waterproof Divesoft transport case with the parts a blender reaches for. The He\/O2 measures oxygen and helium from 0 to 100%, with helium read by the speed of sound so no helium sensor ever needs replacing. The Professional Flow Limiter Mk2 in the set holds a steady 0.2 litres per minute regardless of cylinder pressure, which helps when analysing the residual gas in a nearly empty cylinder before a new mix goes in. The analyser also carries a mixing calculator, compressor monitoring with alarms, and a FOUL AIR warning for hypoxic mixes with nitrogen as the only inert gas. On a boat or at a remote fill point it runs from its rechargeable Li-ion battery and charges from the supplied USB 2.0 AB cable. A connection hose and a spare O-ring set complete the kit. It suits dive centres, gas blenders and technical divers who keep a dedicated analyser at the compressor.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAnalyser: Divesoft He\/O2, oxygen and helium 0 to 100%\u003c\/li\u003e\n\u003cli\u003eHelium measurement: speed of sound, no helium sensor\u003c\/li\u003e\n\u003cli\u003eOxygen sensor: Divesoft R22S, fitted\u003c\/li\u003e\n\u003cli\u003eFlow limiter: Professional Flow Limiter Mk2, DIN G5\/8, constant 0.2 L\/min, 300 bar maximum working pressure\u003c\/li\u003e\n\u003cli\u003eCase: waterproof Divesoft analyser transport case\u003c\/li\u003e\n\u003cli\u003ePower: rechargeable Li-ion battery, USB 2.0 AB charging cable\u003c\/li\u003e\n\u003cli\u003eSet weight: 2.75 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: 24 months on the analyser, 12 months on the battery and oxygen sensor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHe\/O2 analyser with Divesoft R22S oxygen sensor fitted\u003c\/li\u003e\n\u003cli\u003eDivesoft analyser transport case\u003c\/li\u003e\n\u003cli\u003eProfessional Flow Limiter Mk2 DIN G5\/8\u003c\/li\u003e\n\u003cli\u003eConnection hose\u003c\/li\u003e\n\u003cli\u003eAnalyser spare O-ring set\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 AB cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DIVESOFT","offers":[{"title":"Default Title","offer_id":67634223350073,"sku":"8450","price":24500.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/divesoft-analyser-set-blender-case-open.jpg?v=1791626408"},{"product_id":"divesoft-r22d-oxygen-sensor","title":"R22D Oxygen Sensor","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eRebreather divers replace oxygen cells on a schedule, and the Divesoft R22D is a galvanic sensor with a membrane, built for closed-circuit diving apparatus. It connects through a three-pin Molex plug and screws in on an M16x1 thread. Each sensor is registered under its own serial number, which makes it simple to log fitting dates and keep track of the age of every cell in a head. For a diver changing a full set at once, the pack of four supplies matching cells in one order. A single sensor makes a sensible spare for a liveaboard or expedition kit bag, so a failing cell does not have to end the trip. The R22D also fits the Divesoft DNA nitrox analyser, which accepts both R22S and R22D sensors, giving a second life to a cell in a pocket analyser. All galvanic sensors sold by Divesoft carry a 12-month limited warranty. It suits CCR divers who maintain their own units and DNA owners who want a spare cell on hand.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eType: galvanic oxygen sensor with membrane\u003c\/li\u003e\n\u003cli\u003eUse: closed-circuit diving apparatus; also fits the Divesoft DNA analyser\u003c\/li\u003e\n\u003cli\u003eConnector: three-pin Molex\u003c\/li\u003e\n\u003cli\u003eThread: M16x1\u003c\/li\u003e\n\u003cli\u003eTraceability: unique serial number on every sensor\u003c\/li\u003e\n\u003cli\u003ePack: single sensor or pack of 4\u003c\/li\u003e\n\u003cli\u003eWarranty: 12 months limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOne R22D oxygen sensor (Single) or four R22D oxygen sensors (Pack of 4)\u003c\/li\u003e\u003c\/ul\u003e","brand":"DIVESOFT","offers":[{"title":"Single","offer_id":67634223415609,"sku":"4211","price":1800.0,"currency_code":"ZAR","in_stock":true},{"title":"Pack of 4","offer_id":67634223448377,"sku":"4211X4","price":7200.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/divesoft-r22d-oxygen-sensor.jpg?v=1791626409"},{"product_id":"divesoft-r22s-oxygen-sensor","title":"R22S Oxygen Sensor","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eEvery galvanic oxygen cell has a working life, and the Divesoft R22S is the replacement made for Divesoft's own analysers. It is an industrial-grade galvanic sensor with a three-pin Molex connector, and it is the cell Divesoft fits as standard in the ECHO, SOLO O2, He\/O2 and DNA analysers. When a cell reaches the end of its life, a fresh R22S goes into the user-accessible sensor housing on models such as the SOLO O2 and the DNA. For a dive centre running several analysers, a spare on the shelf avoids a day without nitrox checks. The sensor reads across the full 0 to 100% oxygen range, and Divesoft quotes accuracy of plus or minus 1% of full scale under stable temperature and pressure. Each cell is registered under a unique serial number so its age can be traced, and all galvanic sensors sold by Divesoft carry a 12-month limited warranty. It suits owners of Divesoft analysers and dive centres that keep a spare cell for their nitrox station.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eType: industrial-grade galvanic oxygen sensor\u003c\/li\u003e\n\u003cli\u003eRange: 0 to 100% oxygen\u003c\/li\u003e\n\u003cli\u003eAccuracy: plus or minus 1% of full scale at stable temperature and pressure (maker figure)\u003c\/li\u003e\n\u003cli\u003eConnector: three-pin Molex\u003c\/li\u003e\n\u003cli\u003eFits: Divesoft ECHO, SOLO O2, He\/O2 and DNA analysers\u003c\/li\u003e\n\u003cli\u003eTraceability: unique serial number on every sensor\u003c\/li\u003e\n\u003cli\u003eWarranty: 12 months limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOne R22S oxygen sensor\u003c\/li\u003e\u003c\/ul\u003e","brand":"DIVESOFT","offers":[{"title":"Default Title","offer_id":67634247565625,"sku":"4156","price":1650.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/divesoft-r22s-oxygen-sensor.jpg?v=1791626624"},{"product_id":"divesoft-flow-limiter-qd","title":"Flow Limiter for QD Connection","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eAnalysing a cylinder that is already rigged usually means stripping the regulator off, and the Divesoft Flow Limiter for QD Connection avoids that step. It plugs onto the quick-disconnect end of a low-pressure inflator hose, so the sample comes straight through the regulator first stage while everything stays assembled. Divesoft rates the output at 0.2 litres per minute at 10 bar, the same sample flow its analysers are rated for. On a twinset or sidemount day a mix can be rechecked on the boat with the regulators still mounted, using the wing or drysuit inflator hose. On a recreational rig the BCD inflator hose does the same job before a nitrox dive. The fitting is cylindrical with a 5.8 mm diameter and joins the analyser through the Divesoft connection hose, sold separately. It is designed for gas analysis with Divesoft analysers; Divesoft lists a different limiter for CCR Liberty work. It suits divers with Divesoft analysers who want to check a mix without taking their kit apart.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eConnection: quick-disconnect fitting of a low-pressure inflator hose\u003c\/li\u003e\n\u003cli\u003eOutput: 0.2 L\/min at 10 bar\u003c\/li\u003e\n\u003cli\u003eAnalyser side: cylindrical 5.8 mm connector, linked through the Divesoft connection hose\u003c\/li\u003e\n\u003cli\u003eCompatibility: Divesoft gas analysers, not for CCR Liberty calibration\u003c\/li\u003e\n\u003cli\u003eConnection hose: sold separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DIVESOFT","offers":[{"title":"Default Title","offer_id":67634247631161,"sku":"1052","price":465.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/divesoft-flow-limiter-qd.jpg?v=1791626625"},{"product_id":"divesoft-professional-flow-limiter-din","title":"Professional Flow Limiter Mk2 DIN G5\/8","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eAnalysing the last few bar in a cylinder is where a simple needle valve struggles, and the Divesoft Professional Flow Limiter Mk2 answers it with a built-in regulator that delivers a constant 0.2 litres per minute whatever the cylinder pressure. At a fill station that means the residual gas in a nearly empty cylinder can be measured before topping up, the reading a blender needs to work out the next fill. On a full 300 bar cylinder the flow stays the same, so the analyser sees the same sample rate at the top of the fill as at the bottom. The Mk2 combines the relief valve and the sampling nozzle in one mechanism: closing the nozzle first opens the relief valve and vents the trapped gas, then shuts the device fully. It screws onto a DIN G5\/8 valve and links to Divesoft analysers through the connection hose, which is sold separately. It suits blenders, dive centres and technical divers using Divesoft analysers who check gas at every pressure.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eConnection: DIN G5\/8\u003c\/li\u003e\n\u003cli\u003eFlow: constant 0.2 L\/min regardless of cylinder pressure\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 300 bar\u003c\/li\u003e\n\u003cli\u003eValve design: relief valve and sampling nozzle combined in one mechanism\u003c\/li\u003e\n\u003cli\u003eShut-off: closing the nozzle vents remaining gas through the relief valve before closing fully\u003c\/li\u003e\n\u003cli\u003eConnection hose: not included, sold separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DIVESOFT","offers":[{"title":"Default Title","offer_id":67634247696697,"sku":"8437","price":4200.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/divesoft-professional-flow-limiter-din-front.jpg?v=1791626626"},{"product_id":"divesoft-connection-hose","title":"Analyser Connection Hose","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eThe short hose between flow limiter and analyser is easy to lose on a boat and easy to kink in a kit bag, and the Divesoft connection hose is the like-for-like replacement. It links a Divesoft professional, standard or QD flow limiter to the analyser, carrying the gas sample from the cylinder to the sensor. It is made for the cylindrical 5.8 mm low-pressure connection used on Divesoft flow limiters. Anyone buying the Professional Flow Limiter Mk2 on its own needs one, because the limiter ships without a hose. DNA owners moving from direct valve contact to a flow limiter at a fill station need it as well, since Divesoft recommends the pair for that analyser. A spare in the analyser case means a split or lost hose does not stop the morning's gas checks on a liveaboard. It suits owners of Divesoft analysers and flow limiters who want a spare or replacement sample line.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUse: links a Divesoft professional, standard or QD flow limiter to the analyser\u003c\/li\u003e\n\u003cli\u003eConnection: cylindrical low-pressure fitting, 5.8 mm diameter\u003c\/li\u003e\n\u003cli\u003eSupplied as standard: in the ECHO sets and the He\/O2 Blender set\u003c\/li\u003e\n\u003cli\u003eNot supplied with: the Professional Flow Limiter Mk2 bought on its own\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DIVESOFT","offers":[{"title":"Default Title","offer_id":67634247762233,"sku":"8009","price":480.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/divesoft-connection-hose.jpg?v=1791626627"},{"product_id":"divesoft-measuring-cables","title":"Analyser Measuring Cables","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eThe He\/O2 analyser does more than read gas, and the Divesoft measuring cables are the replacement test leads for its electrical measuring modules. With the Divesoft ohmmeter module plugged in, the analyser switches to resistance mode and reads 0 to 1000 ohms, with an optional beep below 200 ohms for quick continuity checks. With the voltmeter module it reads alternating voltage up to 28 V RMS and direct voltage up to 40 V, with polarity shown. In a dive centre workshop that turns the analyser into a tester for torch bulbs, battery packs and scooter wiring, without a separate multimeter on the bench. On an expedition, where every gram in the kit box counts, it is one less tool to pack. The leads are red and black with probe tips, the same pair Divesoft supplied in its Max analyser sets. It suits He\/O2 owners with an ohmmeter or voltmeter module whose original leads are worn, broken or lost.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUse: replacement test leads for the Divesoft ohmmeter and voltmeter modules\u003c\/li\u003e\n\u003cli\u003eWorks with: Divesoft He\/O2 analyser fitted with a measuring module\u003c\/li\u003e\n\u003cli\u003eOhmmeter module range: 0 to 1000 ohms, optional beep below 200 ohms\u003c\/li\u003e\n\u003cli\u003eVoltmeter module range: AC up to 28 V RMS, DC up to 40 V with polarity indication\u003c\/li\u003e\n\u003cli\u003eLeads: one red, one black, with probe tips\u003c\/li\u003e\n\u003cli\u003eMeasuring modules: sold separately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DIVESOFT","offers":[{"title":"Default Title","offer_id":67634265063737,"sku":"8014","price":595.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/divesoft-measuring-cables.jpg?v=1791626776"},{"product_id":"nuvair-o2-quickstick-analyser","title":"O2 Quickstick Nitrox Analyser","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eA nitrox analyser that lives in a dive bag has to cope with water and knocks, and the Nuvair O2 Quickstick is a sealed, pocket-sized tube with nothing to connect. There are no hoses, adapters or cables; the domed end cover restricts the flow over the sensor, so the cylinder valve is cracked gently and the reading shows on the built-in display. On a dive boat the magnetic on\/off switch is waterproof, so spray and wet hands are no problem, and it saves the 9 V battery between checks. On a liveaboard week the anodised marine-grade aluminium body takes the knocks of a busy kit bench. The thermally compensated electrochemical sensor reads 0 to 100% at 0.1% resolution and reaches 90% of its final value in under six seconds. Both the battery and the sensor are user-replaceable, and Nuvair quotes about 36 months of sensor life in air. A screw-together protective sleeve comes in the box. It suits recreational nitrox divers who want a rugged analyser of their own without a flow kit.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRange: 0 to 100% oxygen\u003c\/li\u003e\n\u003cli\u003eResolution: 0.1%\u003c\/li\u003e\n\u003cli\u003eAccuracy: within plus or minus 1% of full scale at constant temperature and pressure (maker figure)\u003c\/li\u003e\n\u003cli\u003eSensor: electrochemical, thermally compensated, user replaceable, about 36 months expected life in air\u003c\/li\u003e\n\u003cli\u003eResponse: under 6 s to 90% of the final value\u003c\/li\u003e\n\u003cli\u003eGas flow: 0.5 to 2 L\/min through the domed end cover\u003c\/li\u003e\n\u003cli\u003eHousing: sealed, water-resistant, anodised marine-grade aluminium\u003c\/li\u003e\n\u003cli\u003eSwitch: magnetic, waterproof on\/off\u003c\/li\u003e\n\u003cli\u003ePower: 9 V alkaline battery, user replaceable\u003c\/li\u003e\n\u003cli\u003eSize: 23 x 4 cm\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0 to 40 degrees C\u003c\/li\u003e\n\u003cli\u003eWarranty: free replacement up to 12 months, 50% off a replacement at 13 to 18 months, 25% off at 19 to 24 months (Nuvair terms)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eO2 Quickstick analyser\u003c\/li\u003e\n\u003cli\u003eScrew-together protective sleeve\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NUVAIR","offers":[{"title":"Default Title","offer_id":67634284921145,"sku":"9456","price":6900.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/nuvair-o2-quickstick-analyser-front.jpg?v=1791626924"},{"product_id":"nuvair-panel-mount-pro-o2-analyser","title":"Pro O2 Panel Mount Remote Analyser 9 V","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eA compressor panel that blends nitrox needs the oxygen reading where the operator stands, not where the gas line runs, and the Nuvair Pro O2 Panel Mount Remote puts the display on the panel and the sensor out on the line. It is designed to install on a control panel or any flat surface, with a threaded oxygen sensor on a cord that sits in-line with the gas a short distance away. At a fill station that means oxygen content can be watched during filling without crowding the panel with plumbing. The same layout suits monitoring a contained space, and the analyser reads oxygen in nitrox, heliox and trimix mixes. The electrochemical sensor covers 0 to 100% and reaches 90% of its final value in under six seconds, with an expected life of about 36 months in air; the Nuvair remote sensor with jack is its replacement. This version runs from a 9 V battery, so no mains supply is needed at the panel. It suits dive centres and fill stations building or upgrading a nitrox panel.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRange: 0 to 100% oxygen\u003c\/li\u003e\n\u003cli\u003eAccuracy: plus or minus 1% of full scale at constant temperature and pressure (maker figure)\u003c\/li\u003e\n\u003cli\u003eSensor: electrochemical, threaded remote sensor on a cord, about 36 months expected life in air\u003c\/li\u003e\n\u003cli\u003eResponse: under 6 s to 90% of the final value\u003c\/li\u003e\n\u003cli\u003eGas flow: 0.5 to 2 L\/min (about 1 bar)\u003c\/li\u003e\n\u003cli\u003eGases: oxygen content of air, nitrox, heliox and trimix\u003c\/li\u003e\n\u003cli\u003eMounting: control panel or other flat surface\u003c\/li\u003e\n\u003cli\u003ePower: 9 V battery\u003c\/li\u003e\n\u003cli\u003eSize: 5 x 10.2 x 14 cm\u003c\/li\u003e\n\u003cli\u003eWeight: 312 g\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0 to 40 degrees C\u003c\/li\u003e\n\u003cli\u003eReplacement sensor: Nuvair O2 sensor with remote jack, 25 mV\u003c\/li\u003e\n\u003cli\u003eWarranty: free replacement up to 12 months, 50% off a replacement at 13 to 18 months, 25% off at 19 to 24 months (Nuvair terms)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NUVAIR","offers":[{"title":"Default Title","offer_id":67634286002489,"sku":"9460-B","price":8200.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/nuvair-pro-o2-panel-mount-remote-analyser-sensor.jpg?v=1791626925"},{"product_id":"nuvair-o2-sensor-remote-jack","title":"O2 Sensor with Remote Jack 25 mV","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eWhen the remote sensor on a Nuvair Pro O2 analyser reaches the end of its life, this Nuvair sensor with remote jack is the direct replacement. It fits the Pro O2 Remote handheld and the Pro O2 Remote panel mount analysers, and the cell may arrive labelled R17S1. The electrochemical sensor outputs 25 mV, plus or minus 2 mV, in air at 25 degrees C at sea level, and reads 0 to 100% oxygen with a response under six seconds to 90%. Its jack takes a 3.5 mm miniature phone plug, tip negative and sleeve positive, and the body carries an external M16x1 thread. At a fill station the threaded body sits in-line with the sampling gas, so oxygen can be read during filling, the job the remote analysers are built for. Nuvair expects about 36 months of service in normal use. It is made for surface, in-line gas analysis and is not intended for underwater use, and this listing is the sensor without the optional diverter. It suits fill station operators running a Nuvair Pro O2 Remote analyser.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFits: Nuvair Pro O2 Remote handheld and Pro O2 Remote panel mount analysers\u003c\/li\u003e\n\u003cli\u003eOutput: 25 mV plus or minus 2 mV in air at 25 degrees C, sea level\u003c\/li\u003e\n\u003cli\u003eRange: 0 to 100% oxygen\u003c\/li\u003e\n\u003cli\u003eAccuracy: plus or minus 1% of full scale at constant temperature and pressure (maker figure)\u003c\/li\u003e\n\u003cli\u003eResponse: under 6 s to 90% of the final value\u003c\/li\u003e\n\u003cli\u003eConnector: jack for a 3.5 mm miniature phone plug, tip negative, sleeve positive\u003c\/li\u003e\n\u003cli\u003eThread: M16x1 external\u003c\/li\u003e\n\u003cli\u003eExpected life: about 36 months in air\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0 to 40 degrees C\u003c\/li\u003e\n\u003cli\u003eWeight: 31 g\u003c\/li\u003e\n\u003cli\u003eUse: surface in-line gas analysis, not for underwater use\u003c\/li\u003e\n\u003cli\u003eDiverter: not included\u003c\/li\u003e\n\u003cli\u003eWarranty: free replacement up to 12 months, 50% off a replacement at 13 to 18 months, 25% off at 19 to 24 months (Nuvair terms)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOne remote oxygen sensor with jack\u003c\/li\u003e\u003c\/ul\u003e","brand":"NUVAIR","offers":[{"title":"Default Title","offer_id":67634286035257,"sku":"9506","price":2600.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/nuvair-o2-sensor-remote-jack.jpg?v=1791626926"},{"product_id":"nuvair-o2-sensor-quickstick","title":"O2 Sensor for O2 Quickstick","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eThe Nuvair O2 Quickstick is built so its owner can change the sensor, and this Nuvair replacement cell is the one it takes. It also fits the OMS O2 analyser, the UBS O2 Stick and Nuvair Pro Trimix analysers sold before April 2013. The electrochemical sensor outputs 25 mV, plus or minus 2 mV, in air at 25 degrees C at sea level, reads 0 to 100% oxygen and reaches 90% of its final value in under six seconds. It connects with a Molex plug and carries an external M16x1 thread. A spare cell in the kit box means an ageing sensor can be changed on the spot rather than ending nitrox checks for the rest of a trip. Nuvair expects about 36 months of service in air, so a dive centre with several Quicksticks can plan replacements ahead. It is made for checking diving cylinders and other oxygen testing on the surface, and it is not intended for underwater use. It suits Quickstick owners and dive centres that keep their analysers running season after season.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFits: Nuvair O2 Quickstick, OMS O2, UBS O2 Stick, Nuvair Pro Trimix sold before April 2013\u003c\/li\u003e\n\u003cli\u003eOutput: 25 mV plus or minus 2 mV in air at 25 degrees C, sea level\u003c\/li\u003e\n\u003cli\u003eRange: 0 to 100% oxygen\u003c\/li\u003e\n\u003cli\u003eAccuracy: plus or minus 1% of full scale at constant temperature and pressure (maker figure)\u003c\/li\u003e\n\u003cli\u003eResponse: under 6 s to 90% of the final value\u003c\/li\u003e\n\u003cli\u003eConnector: Molex\u003c\/li\u003e\n\u003cli\u003eThread: M16x1 external\u003c\/li\u003e\n\u003cli\u003eExpected life: about 36 months in air\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0 to 40 degrees C\u003c\/li\u003e\n\u003cli\u003eWeight: 28.3 g\u003c\/li\u003e\n\u003cli\u003eUse: surface cylinder analysis, not for underwater use\u003c\/li\u003e\n\u003cli\u003eWarranty: free replacement up to 12 months, 50% off a replacement at 13 to 18 months, 25% off at 19 to 24 months (Nuvair terms)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOne oxygen sensor with Molex connector\u003c\/li\u003e\u003c\/ul\u003e","brand":"NUVAIR","offers":[{"title":"Default Title","offer_id":67634298978617,"sku":"9510","price":2900.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/nuvair-o2-sensor-quickstick.jpg?v=1791627081"},{"product_id":"nuvair-o2-sensor-molex-pro-o2-alarm","title":"O2 Sensor with Molex 8-13 mV for Pro O2 Alarm","description":"\u003ch4\u003eDescription\u003c\/h4\u003e\u003cp\u003eA Nuvair Pro O2 Alarm analyser depends on a sensor matched to its electronics, and this Nuvair cell with an 8 to 13 mV output and Molex plug is the replacement it is built for. It fits the Pro O2 Alarm in both handheld and panel mount versions, and Nuvair Pro Trimix analysers sold after May 2013. The electrochemical sensor reads oxygen from 0 to 100% and reaches 90% of its final value in under six seconds, and it carries an external M16x1 thread. At a fill station with a panel-mounted alarm analyser, a spare on the shelf means a failed cell does not take the nitrox panel out of service. For a club that checks every cylinder with a Pro Trimix, it keeps the oxygen channel ready. It is made for surface checks of diving cylinders and is not intended for underwater use. Nuvair notes that orders for this part may take longer to arrive. It suits fill stations and dive centres running Nuvair Pro O2 Alarm or later Pro Trimix analysers.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFits: Nuvair Pro O2 Alarm handheld and panel mount; Nuvair Pro Trimix sold after May 2013\u003c\/li\u003e\n\u003cli\u003eOutput: 8 to 13 mV in air at 25 degrees C, sea level\u003c\/li\u003e\n\u003cli\u003eRange: 0 to 100% oxygen\u003c\/li\u003e\n\u003cli\u003eAccuracy: plus or minus 1% of full scale at constant temperature and pressure (maker figure)\u003c\/li\u003e\n\u003cli\u003eResponse: under 6 s to 90% of the final value\u003c\/li\u003e\n\u003cli\u003eConnector: Molex\u003c\/li\u003e\n\u003cli\u003eThread: M16x1 external\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0 to 40 degrees C\u003c\/li\u003e\n\u003cli\u003eWeight: 32 g\u003c\/li\u003e\n\u003cli\u003eUse: surface cylinder verification, not for underwater use\u003c\/li\u003e\n\u003cli\u003eWarranty: free replacement up to 12 months, 50% off a replacement at 13 to 18 months, 25% off at 19 to 24 months (Nuvair terms)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhat's Included\u003c\/h4\u003e\u003cul\u003e\u003cli\u003eOne oxygen sensor with Molex connector\u003c\/li\u003e\u003c\/ul\u003e","brand":"NUVAIR","offers":[{"title":"Default Title","offer_id":67634299011385,"sku":"9507M","price":3200.0,"currency_code":"ZAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/files\/nuvair-o2-sensor-molex-pro-o2-alarm.jpg?v=1791627082"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0934\/1730\/8473\/collections\/tecnomar-pro-tech-tmi-with-bungee.jpg?v=1789412709","url":"https:\/\/scubaevolution.co.za\/collections\/scuba-instruments-navigation.oembed?page=2","provider":"Scuba Evolution","version":"1.0","type":"link"}