S-TEK Pure Harness Stainless

Description

Lead on a belt pulls at the hips and drags the legs down; the same ballast lying along the spine in a steel plate leaves a drysuit diver carrying less on the belt and finding horizontal trim easier. The steel also stiffens the rig, so a twin set flexes less. Above it runs a single length of webbing through the shoulders, waist and crotch strap with no quick release buckles anywhere, so the fit is set once and then left. It runs at fixed shoulder length or in Extender mode, which lengthens the shoulder straps for donning and doffing over a drysuit. The 3D formed plate has a curved central profile and fully radiused edges, with EVO Angle slots routing webbing at a natural angle and a recessed socket taking S-TEK Ergo Nuts, shaped for cold, wet or gloved hands and sitting flush against the suit. Five D-rings, a stainless waist buckle, silicone hose guide bands, trim weight points, an argon point and a carry handle complete it. It suits a cold-water technical diver on a minimalist rig.

Features

• Continuous webbing PURE harness on a stainless steel backplate
• Ballast carried on the centre line; stiffer under a twin set
• No quick release buckles; fit set once
• Fixed shoulder length or Extender mode for drysuit donning
• 3D formed plate, curved profile, radiused edges, EVO Angle slots
• Recessed socket with S-TEK Ergo Nuts for gloved hands
• Stainless steel waist buckle across the full adjustment range
• Five D-rings: two shoulder, one waist, two crotch
• Silicone guide bands dress the inflator hose
• Trim weight points, argon point and carry handle; wings separate

What's Included

• S-TEK PURE harness
• Stainless steel backplate