Kit DIN Universal 300B

Description

A DIN fitting threads into the valve and captures its sealing o-ring inside the thread, where no knock on a boat deck can roll it out, and it sits closer in with less of the first stage standing proud. This kit converts a yoke SCUBAPRO first stage to DIN rated at 300 bar, which is 4350 psi against the 232 bar a yoke carries, so it raises the working pressure of the set as well as changing the fitting. It is chromed brass and covers most of the range from one box, which is where the word universal comes from: it is listed against the MK2, MK11, MK17, MK21 and MK25, with the MK5 excluded. Two o-rings are supplied, the larger for the MK2 and the smaller for the rest. Fitting is a technician's job and the regulator should be pressure tested afterwards. It suits a diver committing a set to DIN rather than adapting occasionally.

Features

• Converts a yoke SCUBAPRO first stage to DIN 300 bar
• 300 bar, 4350 psi, against 232 bar on a yoke
• Chromed brass, fits the MK2, MK11, MK17, MK21 and MK25
• Not offered for the MK5 or for other brands
• Two o-rings supplied, sized for the MK2 and for the rest
• Fitting and pressure testing are a technician's job

What's Included

• One universal DIN 300 bar kit
• Two o-rings