DIN Connector for 22X

Description

Converting a 22X first stage to DIN changes how the regulator meets the cylinder: the connector screws into the valve and holds the o-ring inside the thread, instead of clamping over it as a yoke does. This Mares DIN connector is made for the 22X first stage and is rated for use at 200 and 300 bar, with a conical sintered filter inside to keep debris out of the first stage. A diver moving to 300 bar steel cylinders needs a DIN fitting to use them, and this is the part that lets an existing 22X go too. A diver whose local dive centre fills DIN cylinders can convert once rather than carrying an adaptor on every trip. A diver replacing a worn or damaged connector on a 22X already set up for DIN gets a like-for-like part. Fitting is a job for a regulator technician, best done at the next service and followed by a pressure check. It suits an owner of a Mares 22X first stage who wants to dive it on DIN valves.

Features

• Fits: Mares 22X first stage
• Connection: DIN
• Rating: for use at 200 and 300 bar
• Filter: conical sintered filter
• Fitting: by a regulator technician, with a pressure check afterwards

What's Included

• One Mares DIN connector for the 22X first stage