SCUBAPRO MK2 EVO/R195 Nitrox DIN300B

Description

This is a dedicated oxygen service regulator, not an air regulator cleared for nitrox, and the distinction is the whole product. It is built and certified for breathing gas above 21 percent and up to 100 percent oxygen at a maximum working pressure of 200 bar, to EN 13949:2004 and EN 144-3:2004, using only approved oxygen-compatible parts for the high pressure seat, o-rings, washers and grease, assembled in a dedicated clean environment. It can therefore hang on 100 percent oxygen out of the box with no rebuild before the first decompression dive. The R195 Technical Series second stage carries an oversized diaphragm and a VIVA venturi lever, which holds effort low across a long stop, and green and yellow accents identify it on a crowded deck. The first stage connection is specific to nitrox valves, so this does not swap onto a standard air cylinder. It suits a technical diver hanging a dedicated deco stage.

Features

• Certified for 21 to 100 percent oxygen at 200 bar maximum
• EN 13949:2004 and EN 144-3:2004
• Oxygen-compatible seat, o-rings, washers and grease throughout
• Assembled in a dedicated clean environment
• Nitrox-specific first stage connection, not interchangeable with air
• Ships with DIN 300 and EN 144 fittings
• R195 Technical Series second stage, oversized diaphragm and VIVA lever
• Green and yellow identification accents
• Servicing requires an oxygen-qualified technician

What's Included

• MK2 EVO first stage in oxygen service
• R195 Technical Series second stage
• DIN 300 and EN 144 fittings