Nuvair O2 Sensor with Molex 8-13 mV for Pro O2 Alarm

Description

A Nuvair Pro O2 Alarm analyser depends on a sensor matched to its electronics, and this Nuvair cell with an 8 to 13 mV output and Molex plug is the replacement it is built for. It fits the Pro O2 Alarm in both handheld and panel mount versions, and Nuvair Pro Trimix analysers sold after May 2013. The electrochemical sensor reads oxygen from 0 to 100% and reaches 90% of its final value in under six seconds, and it carries an external M16x1 thread. At a fill station with a panel-mounted alarm analyser, a spare on the shelf means a failed cell does not take the nitrox panel out of service. For a club that checks every cylinder with a Pro Trimix, it keeps the oxygen channel ready. It is made for surface checks of diving cylinders and is not intended for underwater use. Nuvair notes that orders for this part may take longer to arrive. It suits fill stations and dive centres running Nuvair Pro O2 Alarm or later Pro Trimix analysers.

Features

• Fits: Nuvair Pro O2 Alarm handheld and panel mount; Nuvair Pro Trimix sold after May 2013
• Output: 8 to 13 mV in air at 25 degrees C, sea level
• Range: 0 to 100% oxygen
• Accuracy: plus or minus 1% of full scale at constant temperature and pressure (maker figure)
• Response: under 6 s to 90% of the final value
• Connector: Molex
• Thread: M16x1 external
• Operating temperature: 0 to 40 degrees C
• Weight: 32 g
• Use: surface cylinder verification, not for underwater use
• Warranty: free replacement up to 12 months, 50% off a replacement at 13 to 18 months, 25% off at 19 to 24 months (Nuvair terms)

What's Included

• One oxygen sensor with Molex connector