Nuvair O2 Sensor with Remote Jack 25 mV

Description

When the remote sensor on a Nuvair Pro O2 analyser reaches the end of its life, this Nuvair sensor with remote jack is the direct replacement. It fits the Pro O2 Remote handheld and the Pro O2 Remote panel mount analysers, and the cell may arrive labelled R17S1. The electrochemical sensor outputs 25 mV, plus or minus 2 mV, in air at 25 degrees C at sea level, and reads 0 to 100% oxygen with a response under six seconds to 90%. Its jack takes a 3.5 mm miniature phone plug, tip negative and sleeve positive, and the body carries an external M16x1 thread. At a fill station the threaded body sits in-line with the sampling gas, so oxygen can be read during filling, the job the remote analysers are built for. Nuvair expects about 36 months of service in normal use. It is made for surface, in-line gas analysis and is not intended for underwater use, and this listing is the sensor without the optional diverter. It suits fill station operators running a Nuvair Pro O2 Remote analyser.

Features

• Fits: Nuvair Pro O2 Remote handheld and Pro O2 Remote panel mount analysers
• Output: 25 mV plus or minus 2 mV in air at 25 degrees C, sea level
• Range: 0 to 100% oxygen
• Accuracy: plus or minus 1% of full scale at constant temperature and pressure (maker figure)
• Response: under 6 s to 90% of the final value
• Connector: jack for a 3.5 mm miniature phone plug, tip negative, sleeve positive
• Thread: M16x1 external
• Expected life: about 36 months in air
• Operating temperature: 0 to 40 degrees C
• Weight: 31 g
• Use: surface in-line gas analysis, not for underwater use
• Diverter: not included
• Warranty: free replacement up to 12 months, 50% off a replacement at 13 to 18 months, 25% off at 19 to 24 months (Nuvair terms)

What's Included

• One remote oxygen sensor with jack