SmartStream Harness with Performance Mono Wing 27 lb

Description

Setting the fit of a single-tank backplate rig gets easier with this OMS set, which joins the SmartStream harness to the Performance Mono Wing 27 lb. Pulling the waist straps forward draws the shoulder straps snug in one move, so the fit can be reset quickly when switching between a 3 mm and a 7 mm wetsuit. The harness runs 3.5 m of 2 inch nylon webbing through an OMS stainless steel backplate, with 316 stainless steel D-rings that have weight stops and a sewn crotch strap with a DPV D-ring. The donut wing gives 27 lb (about 12.5 kg) of lift, lets gas move freely around the cylinder and has stabilising bars to limit roll on a long drift. Its 1000 denier nylon shell with urethane backing stands up to boat decks and rocky shore entries. It suits a single-cylinder diver who wants a backplate and wing rig that adjusts quickly.

Features

• Harness: SmartStream, 3.5 m (11.5 ft) of 5.1 cm (2 inch) nylon webbing
• Adjustment: pulling the waist straps forward tightens the shoulder straps
• D-rings: 316 stainless steel with weight stops, two at chest level and one on the waist
• Crotch strap: sewn 5.1 cm (2 inch) strap with a DPV D-ring
• Backplate: OMS stainless steel plate with 2.5 cm and 5.1 cm (1 and 2 inch) webbing slots, cam band slots and 22 accessory holes
• Wing: Performance Mono, donut air cell for a single cylinder
• Lift: 27 lb (about 12.5 kg)
• Wing shell: 1000 denier nylon with an inner urethane backing
• Bladder: polyurethane with ultrasonically welded seams and fittings
• Stability: stabilising bars built into the wing to limit cylinder shift
• Inflator: power inflator on the left, pull dump on the lower left
• Colours: black, red, purple, pink, ocean blue, lizard green, lava orange and camo grey

What's Included

• OMS stainless steel backplate with SmartStream harness and crotch strap
• Performance Mono Wing 27 lb with power inflator
• Low pressure inflator hose