Ots Spectrum Full Face Mask

Description

A full-face mask does not have to come with its own regulator, and the OTS Spectrum is built to take the diver's existing second stage instead. The regulator's mouthpiece tube fits into a port at the front of the mask and is secured with the supplied zip tie, which keeps the cost below a traditional full-face system. With no mouthpiece to bite, long dives avoid jaw fatigue, and the shared oral-nasal pocket leaves room for a microphone when comms are added through the push-to-talk port. On cold-water training dives OTS designs it for water below 10 degrees C, with cold performance set by the chosen regulator, and tests it to 50 m under EN 250:2014. A double seal and a five-point head harness hold it steady, a drain tab helps clear residual water, and the tempered glass visor sits in black PPS clamps. Not every second stage can be mounted, so fit should be checked against the OTS manual first. It suits trained divers and instructors who want a full-face mask built around their own regulator.

Features

• Regulator: diver's own second stage, not included; mouthpiece tube from 3/16 x 5/8 inch up to 1-7/16 x 13/16 inch, single-lipped only
• Mounting: regulator secured in the port with the supplied zip tie
• Seal: silicone skirt with a double seal
• Head harness: five-point, EPDM and natural rubber blend strap
• Visor: tempered glass, clear
• Frame: black PPS visor clamps, glass-filled Zytel buckles and inner frame
• Communications: push-to-talk port, shared oral-nasal pocket for a microphone
• Drain: purge drain tab under the chin
• Certification: CE, EN 250:2014 tested to 50 m, water below 10 degrees C, EN 12021 breathing air
• Colour: black skirt with a clear visor

What's Included

• Spectrum full face mask
• Regulator mounting zip tie
• OTS wrench