Malta belt stood on its buckle with the black rubber strap coiled behind

Polished Cressi buckle on the Malta belt with the rubber webbing coiled behind

Close-up of the ribbed black rubber webbing used on the Malta weight belt

Malta belt buckle from the slot side with the riveted rubber strap attached

Malta belt stainless buckle stamped Cressi, with the riveted rubber strap running away

Front view of the Malta belt buckle and the three rivets holding the rubber strap

End-on view of the Malta belt buckle showing the buckle plate and rivet heads

Malta rubber weight belt coiled with the stainless Cressi buckle sitting on top

Black Malta weight belt folded over with the silver buckle and rivet detail

Cressi Malta Belt

SKU TA626010

R 1,260.00

Colour: Black

BlackBlack

Product variants

Free delivery from R1,500. Most orders leave within 24 hours.
Genuine new stock with the full manufacturer's warranty.
Talk to a diver about this: WhatsApp 082 557 3822

Description

A nylon weight belt set correctly at the surface is loose at ten metres, because the wetsuit under it compresses and the abdomen draws in. That is a nuisance for a diver and a genuine problem for a freediver, who cannot keep re-cinching a belt on the way down. The Malta is rubber, and stretch is the whole point: the belt tightens automatically as the suit thins under pressure, so it stays snug against the diver in every phase of the dive rather than sliding towards the chest. The buckle is quick-release stainless steel for instinctive, rapid emergency release, with a pin that passes right through and is riveted at both ends. Stainless is the right specification for a part that lives in salt water and must work first time. It is finished in black. That answers a freedive, a deep descent and any dive in a thick suit. It suits a freediver or spearfisher whose belt loosens on descent.